AccessoriesFT-IR Acc. (ATR)
Golden Gate | Versatile ATR Accessory
  • Golden Gate | Versatile ATR Accessory
  • 제조사 :
    Specac
  • Catalog Number :
  • CAS Number :

Golden Gate | Versatile ATR Accessory

고품질 FTIR 악세사리 및 FTIR/XRF 샘플링!

(주)비케이인스트루먼트는 영국 Specac 사의 공식대리점으로 보다 합리적인 가격에 다양한 제품을 취급하고 있습니다.



Durable crystal ATR top-plate

Specac’s Golden Gate™ ATR is a high performance single reflection monolithic diamond ATR sampling accessory, featuring a Type IIIA diamond ATR element metal-bonded into a tungsten carbide mount and providing outstanding durability and exceptional chemical resistance.

ZnSe and KRS-5 lens options are available when ordering the Golden Gate™ ATR; KRS-5 gives a wider range of Mid-IR studies than ZnSe, but with reduced throughput.

Scroll to the bottom for customer reviews of the Golden Gate ATR.


Easily adapt your ATR analysis

The demountable nature of the top plate is well suited for the preparation of toxic or harmful materials, as they can be prepared in a glove box, sealed, and then measured with a higher degree of operator protection than other infrared sampling methods. The robust design, strength and inherent inertness of the Golden Gate™ diamond ATR element allows the spectral analysis of abrasive, hard, reactive or corrosive samples

 

High Temperature ATR

Specac’s High Temperature Golden Gate™ ATR Accessory is a high performance single reflection monolithic diamond ATR product offer for spectroscopic sample analysis of samples up to 300°C. This ATR product extends the capability of the standard Specac Golden Gate™ ATR Accessory and Heated Golden Gate™ ATR Accessory, to provide high-quality spectral data in the high temperature analysis of a broad range of materials including those that are abrasive, hard, reactive, or corrosive. This product is especially well-suited for the spectroscopic analysis of reactions and processes that only occur at temperature.

The High Temperature Golden Gate™ ATR is supplied with a temperature controller with digital readout to 1°C. Low voltage heaters are used, and thermal fuses are fitted as standard for added safety. The controller complies with European CE regulations.

 

Low Temperature ATR

The Low Temperature Golden Gate™ ATR is a single reflection monolithic diamond ATR accessory for FTIR ATR analysis from -150°C to 80°C. The system uses a thermally insulated copper and stainless steel dewar in conjunction with an integral heater. The high thermal conductivity of the diamond crystal provides rapid temperature stabilisation, accurate temperature measurement, and avoids temperature gradients across the sample.

This ATR product extends the capability of the standard Specac Golden Gate™ ATR Accessory to provide high-quality spectral data in the low temperature analysis of a broad range of materials. This product is especially well-suited for the spectroscopic analysis of reactions and processes that only occur at low temperature.

 

Super Critical Fluids ATR

The Super Critical Fluids Golden Gate™ ATR extends the capability of the standard Specac Golden Gate™ ATR Accessory to provide high-quality spectral data under super critical conditions, with pressures up to 6000 psi and temperatures up to 300°C.

Infrared spectra of super critical fluids, high pressure gases, and liquids, as well as materials subjected to super critical, high pressure gases, and liquids, can be measured. The spectral measurements can be obtained from the gas phase through to the supercritical region and to liquid like densities.

 

Reaction Cell ATR

The Reaction Cell Golden Gate™ ATR is a single reflection monolithic diamond ATR accessory for in-compartment FTIR ATR reaction analysis over a broad range of pressure and temperature conditions. This ATR product extends the capability of the standard Specac Golden Gate™ ATR Accessory to provide high-quality spectral reaction analysis at pressures up to 3000 psi and temperatures up to 200°C.

 

Micro Specular Reflectance ATR

Specac offer a 45° angle Micro Specular Reflection Top Plate version of Golden Gate™ Accessory is for spectroscopic analysis of flat samples greater than 2mm x 2mm, or powders that can be pressed into a self-supporting wafer.

A scribed reference grid allows accurate repeat positioning of samples. 

 

  

Features


· Little or no sample preparation required
· Rugged Type IIIA monolithic diamond ATR element
· Hard, inert, sapphire self-levelling pressure anvil
· High pressure load bridge for excellent quality of spectral data
· Quick-release bridge opens clear of ATR stage
· Wide choice of advanced ATR top plate options
· Built-in pressure control for reproducible results
· ZnSe and KRS-5 lenses available 
· Benchmark™ baseplate compatible 

 

 

 

TOP
ݱ